- Link policy
- The Team
- Armament Research, Development and Engineering Center
- Army Research Laboratory
- Aviation and Missile Research, Development and Engineering Center
- Communications-Electronic Research, Development and Engineering Center
- Edgewood Chemical Biological Center
- Natick Soldier Research, Development and Engineering Center
- Tank Automotive Research, Development and Engineering Center
Posts Tagged Picatinny Arsenal
PICATINNY ARSENAL, N.J. (Sept. 26, 2013) — Secretary of the Army John McHugh was at the Picatinny Arsenal Thursday, to assess the effect of sequestration on the installation’s efforts in research, development, acquisition and lifecycle management of weapon systems and ammunition.
“This is a unique facility with a critically important mission; there really is no other government or industry counterpart to Picatinny,” McHugh said, underscoring the arsenal’s contribution to national security. “The workforce possesses knowledge and expertise that increases the lethality of the joint services warfighter.”
Picatinny Arsenal was designated the Joint Center of Excellence for Guns and Ammunition, providing products and services to all branches of the U.S. military.
PICATINNY ARSENAL, N.J. (September 25, 2013) — As the power and popularity of mobile devices grows, so does the desire for faster data processing without consuming much power.
The HyperX computer chip technology, under development by researchers at Picatinny Arsenal holds the promise to deliver that goal for both commercial and military users.
The small, HyperX chip was intentionally designed to meet high volume, low power processing requirements.
PICATINNY ARSENAL, N.J. (September 18, 2013) — When preparing to face a more talented opponent, coaches tell their players that the path to victory is pulling together as a team to somehow obtain more than a sum of each player’s talents.
For Army scientists, that same concept may have been expressed in the form of an advanced algorithm that gets optimum performance from a team of inertial sensors, which could be used to guide cannon-fired munitions to a target with near precision, even without Global Positioning Satellite navigation.
In addition to high performance, a big advantage to the team of sensors is greatly reduced cost.
PICATINNY ARSENAL, N.J. — Actor John Ratzenberger, best known for his iconic role as postal worker Cliff Clavin on the TV show “Cheers,” is promoting manufacturing in the U.S.
His interest led him to visit Picatinny Arsenal Sept. 4, where he saw first-hand a number of the advanced manufacturing techniques the installation uses to equip the nation’s warfighters.
Ratzenberger’s interest in manufacturing previously inspired him to produce and host shows like “Made in America,” a Travel Channel TV production highlighting manufacturing companies that produce interesting products across the nation.
PICATINNY ARSENAL, N.J. — We’re so darn efficient we got an Energy Star Award. Awesomeness.
PICATINNY ARSENAL, N.J. (August 22, 2013) — An enemy convoy transporting a supply of fuel rumbles across the desert floor, an ideal target for armor-piercing incendiary projectiles.
These projectiles are most useful for “after-armor effects,” such as an incandescent flash immediately after penetrating a hard target. The resulting plume may be useful for devastating any fuel-storage facilities by igniting the fuel vapors.
The Army uses a formulation called IM-28 that is charged into certain armor-piercing incendiary projectiles, which can be fired from such weapons as the M2, M3, and M85 machine guns.
PICATINNY ARSENAL, N.J. — So there was this high school student who just graduated this year who presented a paper at the Monmouth Junior Science Symposium that was so thorough with his independent research on nanotechnology that we just had to get him a personal invite to come and tour our labs. Seriously exciting.
PICATINNY ARSENAL, N.J. — Why stop at just getting students more interested in science, technology, engineering and mathematics when we can get local teachers involved and excited as well? Well that’s just what we did and we’re quite pleased with the results.
PICATINNY ARSENAL, N.J. — Sure we’re already the Joint Center of Excellence for Armaments and Munitions. Now we’ll also be known as a degree granting institution. Who will be the first to earn their PhD from Picatinny Arsenal?
PICATINNY ARSENAL, N.J. — Picatinny Arsenal and the New Jersey Institute of Technology coordinated a visit here for middle school girls to get them excited about careers in science and technology. How’d it go? You’ll have to find out yourself.
WEST POINT, N.Y. — Two West Point cadets invent something suspiciously similar to Batman’s grappling hook gun. Picatinny engineers rush to help cadets secure patents ahead of Wayne Enterprises.
PICATINNY ARSENAL, N.J. — The digital M119A3 105 mm howitzer was fielded by Soldiers of the 82nd Airborne Division. It was a PEO Ammunition project, but ARDEC helped out too.
ABERDEEN PROVING GROUND, Md. — U.S. Army science advisors are embedded with major units around the world to speed technology solutions to Soldiers’ needs.
The Field Assistance in Science and Technology program’s 30 science advisors, both uniformed officers and Army civilians, provide a link between Soldiers and the U.S. Army Research, Development and Engineering Command’s thousands of subject matter experts.
ABERDEEN PROVING GROUND, Md. — U.S. Army program managers earned Department of Defense acquisition awards recently for rapidly fielding a fire-resistant ghillie suit and an enhanced fuze rocket warhead.
PICATINNY ARSENAL, N.J. — Local area high school students were invited to our “Introduce a Girl to Engineering” night. We like to think it went well.
PICATINNY ARSENAL, N.J. — We switched our contract and saved money on armor plates for Bradley Fighting Vehicle. How much? Find out below.
PICATINNY ARSENAL, N.J. — Dale Ormond, director of RDECOM, stopped at Picatinny to deliver an important message. Click the link to find out what he had to say.
PICATINNY ARSENAL, N.J. — See how the Armament Research Development and Engineering Center teamed up with the Army Research Lab to get our plans and schematics up to speed with the rest of industry saving time, effort, and $$$. Because saving $$$ is kind of a big deal.